Ultrasonic Inspection NDT Sample Test Report Format

Ultrasonic Inspection Report An NDT Inspection Test Report, useful for documenting Observations of Ultrasonic Inspections Format No: TNE-UTR-01 Rev ‘0’ TRINITY NDT® An ISO 9001:2008 Certified Company Plot NoV-22(A), 6th Main, 2nd Stage, Peenya Industrial Estate, Bangalore-560058, INDIA Telefax:+91-80-28366466, Mobile:+91 98441 29439, 99009 29439, E-mail: infotrinityndtcom, Website: wwwtrinityndtcom This Inspection Report format & other NDT report formats are available for free download at wwwtrinityndtcom Aerospace & General NDT ǀ Training & Certification ǀ Welding Inspection ǀ ASNT NDT Level III Consulting ǀ Sales TRINITY NDT® Format No TNE-UTR-01 Rev ‘0’ This format & other NDT report formats are available free at wwwtrinityndtcom ULTRASONIC EXAMINATION REPORT Report No : Request No : Page No : Client : Project No : Location : Order / Drg No : Mark / Item no: Material : Th: Reference Procedure Specification : Surface Condition : Surface Temp Acceptance Criteria : Heat Treatment : BSR ASR Weld Process : Equipment & Technique Model : SL No: Manufacturer : Couplant type : Wall Paste Cable Type : Basic Calibration Block : V1(IIW) V2 (IIW) Calibration block : Search Unit : Manufacture : Technique : Probe Angle 0 45 60 70 Weld Joint Sketch Scanning Employed From : SL No Dimension Frequency Sensitivity Ref gain Range Calibration Sheet Attached : Yes No Item / Mark No Order / Drg No Joint no Welder id Tested length Evaluation Result Remarks Type Length Depth Note: CR- Crack IP-Incomplete Penetration IF – Incomplete Fusion SL- Slag P- Porosity EP-Excess Penetration CP- Cluster Porosity CON – Concavity BSR – Before Stress Relief ASR – After Stress Relief NDT Inspector Approved by Witnessed by Name Signature Level Date